Zhongshan Nuobang Color Equipment Co.,ltd

Innovative highlights of the exhibit：

In addition to all the functions of the previous generation, all parts are CNC precision machined, using imported brand accessories, touch technology, and unique electronic control fault detection functions.

Product introduction:

Features: In addition to all the functions of the previous generation, all parts are CNC precision machined, using imported brand accessories, using touch technology, unique electronic control fault detection, pressure setting automatic operation, and other functions, making user operation and setting more convenient and simple. 1. Electric control detection: The entire machine adopts PLC and touch screen control, with stable functions and few faults. At the same time, it can detect the status of each control component, making maintenance simple and convenient. 2. All pressure adjustments are convenient: uniform ink pressure (0-200N), color spreading pressure (0-1700N), uniform can be set on the screen, and the instrument automatically executes. The uniform ink pressure and color spreading pressure are adjustable higher than the old model, and the color spreading effect of rough paper is better. 3. The imprint leaves a 38mm secondary color development light color position.

Innovative highlights of the exhibit：

Color development accuracy: The repeated color difference value detected by a spectrophotometer can reach a Δ E value below 0.8 (average of ten times).

Product introduction:

Input voltage: AC220V 50Hz Instrument power: 350W Effective area of ink color strip: 40 × 210mm (4 pieces) 60 × 210mm (3 pieces) 100 × 210mm (2 pieces) optional Exhibition material size: 290X250mm Uniform ink pressure: eccentric adjustment Uniform ink speed: 0-1450 rpm adjustable Color development speed: 0-15 rpm adjustable (slower and more torque than the previous generation model, and can also be used with larger pressure settings) Instrument dimensions: 555X440X320MM Uniform ink time: adjustable from 1 second to 10 hours (usually 60 seconds) Rubber roller specification: ø 67 × 229MM (maximum color development area 229 × 210mm)

Innovative highlights of the exhibit：

Unique characteristics of the instrument: After the ceramic roller rotates and the ink is evenly applied, the printing material and plate cylinder start rotating synchronously for one cycle to complete the sampling work.

Product introduction:

Unique characteristics of the instrument: 1.After the ceramic roller rotates and ink evenly, the printing material and printing plate cylinder start rotating synchronously for one week to complete the sampling work. The ceramic roller, printing material cylinder, and printing plate cylinder are running synchronously to ensure the quality of the sampling. 2. Scraper, ceramic roller, printing plate roller. The four structures of the printing drum adjust the pressure for flexible adjustment 3. Easy and convenient disassembly and assembly of mesh rollers and scrapers 4. Adopting a large drum structure, the installation of printing materials, installation of printing plates, and cleaning of printing plates are simple and convenient

Innovative highlights of the exhibit：

Suitable for ordinary or UV ink, printing materials with horizontal movement and color display, suitable for non bending materials such as iron sheet, cardboard, glass, plastic board, etc.

Product introduction:

Color display machine parameters: 1. Input voltage: AC220V 50HZ 2. Power: 350W 3. Ink stripe area: 45 × 210mm × 4 articles 4. Effective area of color stripe: 40 × 200mm × 4 articles 5. Exhibition material size: 290 × 250mm 6. Instrument size length × wide × High (approximately): 555 × two hundred and sixty × 440mm 7. The uniform ink speed can be set with stepless speed regulation: (0-1450 rpm) 8. Uniform ink mode: 4-stage mode can be set 9. The uniform ink time can be set to 0-10 hours 10. The uniform ink pressure can be adjusted, with an adjustment range of approximately 1.5mm 11. Adjustable color development pressure: approximately 2mm adjustment range 12. Color development method Flat printing without bending

Innovative highlights of the exhibit：

We use brands such as Siemens PLC from Germany and Weilentong from Taiwan for electrical appliances, with highly automated synthesis and fully automatic control.

Product introduction:

Roll to roll gravure printing testing machine CB-350EX: 1. Adopting a single side structure, easy to operate and clear at a glance. 2. It adopts brands of electrical appliances such as Siemens PLC from Germany and Weilentong from Taiwan, with highly automated synthesis and fully automatic control (plate roller speed, rubber roller clutch pressure, scraper compression and exit, air dryer start, heating start, exhaust start, digital pressure display and adjustment, discharge tension control, receiving tension control magnetic powder clutch, drying tunnel temperature, oven loading switch, circulating ink supply, safety indicator light). 3. Design a pneumatic top structure to facilitate the replacement of the plate roller and save operating time. 4. Both printing and receiving are driven by a servo 1000W motor, ensuring stable power and allowing even thick materials to pass through.

Innovative highlights of the exhibit：

Adopting touch technology, human-computer interaction is more convenient, and any operable and configurable functions can be easily operated on the screen.

Product introduction:

The main technical parameters of the NB600 fully automatic color display machine for the flagship version of Caibang: Input voltage: AC220V 50Hz Instrument power: 350W Effective area of ink color stripes: 40X210mm (4 stripes) 60X210mm (3 stripes) 100X210mm (2 stripes) optional Exhibition material size: 290X250mm Uniform ink pressure: adjustable Uniform ink speed: 0-1450 rpm Color development speed: 0-15 revolutions per minute Instrument dimensions: 555X440X320MM Rubber roller specification: ø 67 × 229MM (maximum color development area 229 × 210mm) Rubber roller (ordinary ink rubber roller, UV ink rubber roller optional)

Innovative highlights of the exhibit：

Adopting a PLC+touch screen+touch button structure, the technology is mature and stable, easy to operate and use.

Product introduction:

NCB ink proofer, item CB100-E gravure proofing machine Input voltage AC220V, 50Hz-60Hz 150W Printing force: 00.0-100.0% fine adjustment Printing speed: 10-130 metre/Minute, Touch Control Adjustment Dimension: 525X430X280mm Anilox cylinder size: ∮130X170mm Pattern engraving: Official standard, Custom with special lineature is available Standard: roll circumference 411 MM roll width 170 MM Official engraving lineatures of 40um (80L /cm); 45um (75L/cm); 50um(70L/cm); 55um(60L/cm) Color Strips size: 50x80mm x 4 prismatic Tooth angle 120° Screen Angles 45° Substrate size: 140x328mm (semi-perimeter) or 140x658mm (full perimeter) Printing area: 120x380mm Paper core: Inside diameter 76MM, outer diameter: 95MM Material diameter: 200mm Convenience function: Automatic switching of white cover or low precision color printingchromaticity printing. Net weight: 80KG Function: Low precision color register pringing, roll∮130 can automatically swich white register function. Advantages: 1. Adopt PLC+ touch screen+touch button structure, mature and stable technology, easy to operate and use; 2. Gravure plate+ scraper round proofing, with a printing press structure to; 3. The imprint cylinder is equipped with positioning device, electric pressing, without compressed air source; 4. Automatic positioning of printing plate, easy operation; 5. Suitable for various types of ink, gravure ink is also easy to clean; 6.Printing plate content can be customized according to customer requirements,electric engraving or laser plate making can be uniform. 7. It is a necessary instrument for computer color matching.

Innovative highlights of the exhibit：

Adopting a combination of PLC, touch screen control, and commonly used mechanical buttons, without the need for frequent operation settings, the operation is simple and easy to use.

Product introduction:

Caibang Rotogravure printability tester (Roll continuous printing version, item CB100-EX) Parameters: Voltage: AC220V, 50HZ-60HZ Power: 0.2KW Air Dryer power:1500Wx2 Printing force: 00.0-100.0% fine adjustment Proofing speed: 0-130metre/minute, Touch control to adjust fixed speed. Stepless speed adjustment by potentiometer Dimension: L1400*W705*H1135mm Anilox cylinder size: 80X160mm Pattern engraving: Official standard, Custom with special lineature is available. Print size: 250*110-140mm Printing area size: Pattern design size of 130X250mm Paper topping material: Diameter less than 250mm, 3inch cartridge. Net weight: 110kg Temperature Control: The dryer temperature control range is adjustable from room temperature to 120 degrees celsius, with two standard dryers. Features of caibang CB100-EX desktop continuous gravure color machine: 1. Using PLC+touch screen control + common mechanical key combination, without frequent operation setting, easy to use 2. The instrument design does not need external compressed air source to reduce the limitation of service conditions and compressor noise 3. It can be used on the desk of the office. It weighs 110kg and easy to move 4. Simple operation, no machine operation experience 5. Unique can be as little as dropper type 3ml ink to complete continuous proofing 6. Ink tray continuous proofing only needs 350ml ink to complete proofing, reducing pollution and waste 7. The infrared heating tube is about 30mm away from the surface of the printing sample, and the temperature set actually acts on the surface of the printing material, and there is no open fire, so as to make efficient use of heat energy and reduce energy loss 8. The humanized design of the material receiving is in front of the operating machine, and the printing effect can be clearly observed without step shifting 9. The machine design is small, beautiful and practical.

Innovative highlights of the exhibit：

Characteristics: 1. Easy and convenient to operate. 2. Low-speed, intermittent barrel side stirring; unique impeller design, ink can be switched and cut during the stirring process, the ink will be stirred evenly within five minutes; the ink after strring will not heat up.

Product introduction:

Main technical parameters of Caibang CB171B ink agitator: Input voltage: 220V, 50HZ Power: 1.5KW Outline dimension: 850*700*480mm Material barrel size: 400x280mm,304 stainless steel Material barrel capacity: Min.4kg, max.30kg. Rotational speed: 0-50RPM Net weight: About 176KG Characteristics: 1. Easy and convenient to operate. 2. Low-speed, intermittent barrel side stirring; unique impeller design, ink can be switched and cut during the stirring process, the ink will be stirred evenly within five minutes; the ink after strring will not heat up. 3. The mixing speed can be adjusted. 4. Mixer: L-type propeller mixing, forming as a whole, without a screw hole, easy to clean. 5. Drive mode: direct drive to reduce power loss. 6. Desktop design makes it easy to move.

Innovative highlights of the exhibit：

Features: 1. Professional with simple operation. 2. The machine with an unique designed impeller, mixing at low speed and at inervals scrape to the inner wall of the tank, So your inks would be homogenetic without heating-up during mixing of being rolled over and sheared down.

Product introduction:

Ink mixer Model CB-200 Power: 200W, 220V, 50Hz Outline dimension: 478x280x416mm Capacity: 1-2.5kg (Standard ink tank of 2.5kg) Rotation speed: 0-50rpm Net weight: 35kg Features: 1. Professional with simple operation. 2. The machine with an unique designed impeller, mixing at low speed and at inervals scrape to the inner wall of the tank, So your inks would be homogenetic without heating-up during mixing of being rolled over and sheared down. Inks can be direcly used to printing after 5 minutes thorough mixing. 3. Easy to replace ink tank, which will be automatically locked and without cleaning. 4. Stepless adjustable ink mixing speed. 5. Agitator arm: L Shape, without any screw hole, easy to clean. 6. Driving mode: Reduce power loss 7. Desk type, moveable.

Innovative highlights of the exhibit：

The instrument can be used for coating, solid color, and dot pattern proofing. The coating area is resin plate material, and the printing material is printed in a translational manner.

Product introduction:

Item: CB400-Y Application: Single printing testing (ink matching & proofing) In put: 220V，50/60Hz Power ：300W Ink supply: by pasteur pipette Applicable to：Flexo water base ink, UV ink, solvent ink,letterpress ink, offset ink Substrate thickness：0.01-2mm (bendable) Substrate size：150x200mm Substrate：Paper, poly films, non-woven fabric napkin and cardboard…etc Pressure between ceramic roller & plate cylinder; Adjustable Pressure between plate cylinder & impress roller:Adjustable printing speed：10-60m/minute Printing area：100x150mm Printing plate size：120x185mm Printing plate thickness：1.7mm Adhasive:0.3mm Ceramic roller size：φ70x140mm Ceramic roller: 1 piece of official standard ceramic roller, Custom design lineature (70-1200lpi)is availbable. Machine dimension：525x525x450mm NW：90KG UV Curing system: (Optional)

Innovative highlights of the exhibit：

The digital viscosity tester uses PLC, touch screen, and servo motor to accurately display the instantaneous copper roller speed, water tank temperature, and other testing conditions.

Product introduction:

Technical parameters of Caibang CB-50T viscosity tester: Copper roller spindle speed: I gear -400 rpm, II gear -800 rpm, III gear -1200 rpm, IV gear -1600 rpm, V gear -2000 rpm Additional self setting speed (100-2000) rpm Power supply voltage: 220V 50HZ Total electrical power: 1600 watts (including 800 watts for the motor and 800 watts for the water tank) The horizontal error of the spindle copper roller after leveling on the workbench is 0.03mm Standard single heat constant temperature water tank with a temperature adjustment error of ± 0.2 ℃ Dual use cold and hot ± 0.1 ℃ (optional) Display accuracy: 0.1 ink viscosity units Under the same testing conditions, the retest error is ± 0.3 for ordinary ink and ± 0.5 for UV ink Printing: testing time, number, temperature, speed, viscosity value, sending PC data TV value One standard easy to disassemble and clean ink injector (standard capacity 1.32CC) Instrument overall size: 750x300x480mm Total weight of instrument: 130KG Noise less than 50 decibels Characteristics of CB-50T Ink Viscometer: 1. The digital viscosity tester adopts PLC, touch screen, and servo motor to accurately display the instantaneous copper roller speed, water tank temperature, and other testing conditions; 2. The instrument is equipped with a user-friendly design, fully automatic testing, and there is no need to manually operate the clutch pressure between the testing roller and the ink leveling roller during the process; 3. The instrument comes with functions such as testing ink and increasing viscosity, and can optionally be equipped with the Excel table function of sending data to the PC; 4. Equipped with ink cleaning scraper, easy to clean and save consumables; 5. High automation, reduce Personal equation, and high stability; 6. UV rubber rollers are equipped with high-quality Japanese rubber rollers as standard; 7. The constant temperature water tank can be optionally equipped with a cold and hot constant temperature water tank;

Innovative highlights of the exhibit：

Network version software features: Password management Humanized interface Database establishment Database backup Database recovery Database Management Formula calculation Formula correction Color Comparison Recipe Save Data export to Excel Excel data import Caitong Electronic Database

Product introduction:

Network version software features: Password management Humanized interface Database establishment Database backup Database recovery Database Management Formula calculation Formula correction Color Comparison Recipe Save Data export to Excel Excel data import Caitong Electronic Database Import new data from Caitong Library Reuse of old ink Suitable for multi brand instruments Instrument data input method Substrate warehouse Recipe export Convenience features Connecting the conveyor Search Data Recipe Process Record Recipe printing Report printing Software activation upgrade Language settings

Innovative highlights of the exhibit：

Clean production, precise measurement, cost saving, time saving, precise allocation, environmental cleaning, rapid return, gas and electricity control.

Product introduction:

CB-500 ink formula weighing system parameters: Input power supply: AC220V 50-60Hz, overall power 6.5KW Ink pipe diameter 1.2 inches, i.e. DN32 Color matching weighing range: 4KG (precision 0.01g) 10KG (precision 0.1g) 50KG (precision 5g) Accuracy: 0.02%, up to (+/-0.01g) Compressed air source: 0.6MPa Large valve ink output: 3KG per minute, small valve ink output controllable 0.05 grams 18 color decks: length x width x height=5648X1300X1952; 12 color decks: length x width x height=4332X1300X1952; 6 color decks: length x width x height=3016X1300X1952; Standard configurations include 6, 12, and 18 heads, and more than 18 heads can be customized Applicable viscosity range: Paste or fluid materials below 200000 mPa. s Large valve ink output: about 2KG per minute, small valve ink output controllable 0.01 grams Net weight: 800KG Characteristic: Clean production, accurate measurement, cost saving, time saving, accurate allocation, environmental cleaning, rapid return, gas and electricity control. Modular structure, flexible expansion and selection, suitable for high viscosity offset printing ink, medium viscosity flexographic printing ink, and screen printing ink. Replacement of the diaphragm pump is suitable for low viscosity gravure printing ink. Ergonomically and safely designed, all operations are performed at the front end. The heating function of the material barrel is convenient and practical, and the material barrel can be selected as a transfer barrel. You can directly purchase ink from an ink company, reducing solid waste, and being environmentally friendly. The refueling bucket is basically completed within one minute. For example, in some high-volume base inks, a pneumatic plunger pump with a large packaging ink bucket of 200KG or 20KG can be selected for ink supply, and the pipeline is connected to the weighing system for use. Seamless connection with color matching software, direct and easy to use. Modern printing or ink companies are facing higher efficiency, quality, and environmental challenges, and personalized spot color ink has become an important component of printing. Printing companies can use color matching automatic weighing systems to instantly select different spot color inks without maintaining a large inventory of spot colors. Various spot color inks can be formulated according to computational formulas, making personalized ink blending possible. Unique fast ink supply automatic compensation ratio function, efficient and rapid completion of color matching tasks. The dispensing system quickly and accurately controls each spot color ink through two stages of output valves, with an accuracy of 0.02% Optional mixing equipment: Paddle mixer: standard 50KG, 30KG, 10KG, 5KG, 2.5KG Optional customization: centrifugal stirrer: 5KG or 1KG, bubbleless paddle less stirrer

Innovative highlights of the exhibit：

Four standard light sources: Configuration: D50 or D65 artificial daylight source, 2 pieces, 18W TL84 European and Japanese commercial light sources, two 18W 1 UV ultraviolet light source 18W F yellow light source, 4 colorimetric reference light sources 40W Weight: 35Kg

Product introduction:

Four standard light sources: Configuration: D50 or D65 artificial daylight source, 2 pieces, 18W TL84 European and Japanese commercial light sources, two 18W 1 UV ultraviolet light source 18W F yellow light source, 4 colorimetric reference light sources 40W Weight: 35Kg Volume (width x depth x height): 710x530x570mm Voltage: 220V/50HZ

Innovative highlights of the exhibit：

Technical parameters of electronic balance: Model: HZY-A320 Range (g): 320g/1mg Readability (mg): 1/5 Repeatability (mg): ± 2/± 5 Linear error (mg): ± 2/± 5 Operating temperature (℃): 20 ± 7.5 Scale size (mm): ø 90 Boundary dimension (mm): 295x205x305 Startup preheating (minutes): 10-20

Product introduction:

Technical parameters of electronic balance: Model: HZY-A320 Range (g): 320g/1mg Readability (mg): 1/5 Repeatability (mg): ± 2/± 5 Linear error (mg): ± 2/± 5 Operating temperature (℃): 20 ± 7.5 Scale size (mm): ø 90 Boundary dimension (mm): 295x205x305 Startup preheating (minutes): 10-20

Innovative highlights of the exhibit：

Main technical parameters of CB300UV curing machine: Instrument power: AC220V 50Hz 250W External dimensions: 1250x540x1100mm Light source power: 2KW (1 unit) Conveying speed: 0-10 meters/minute Mesh belt material: Teflon Mesh belt width: 300MM Entrance height: 100MM

Product introduction:

Main technical parameters of CB300UV curing machine: Instrument power: AC220V 50Hz 250W External dimensions: 1250x540x1100mm Light source power: 2KW (1 unit) Conveying speed: 0-10 meters/minute Mesh belt material: Teflon Mesh belt width: 300MM Entrance height: 100MM Cooling method: forced air cooling

Innovative highlights of the exhibit：

Product introduction: